 JBL PRX635 Powered PA Speaker - 15 inch, 1500 watts
The PRX635 is comprised of one 15 inch 265F Differential Drive woofer, a 6.5 inch 195H horn-loaded 90° by 50° mid-range and a 1 inch annular polymer diaphragm, neodymium compression driver mounted to a 90° by 50° horn, all driven by a 1500 watt (3 x 500) Audio Class-D power amplifier. A propriety DSP chip is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
JBL PRX635 Speaker Features:
Maximum SPL 135 db peak 15 inch Differential Drive dual voice-coil and magnetic gap, neodymium woofer
6.5 inch horn loaded midrange transducer
1 inch polymer diaphragm compression driver
1500 Watt (3 x 500 watt) Class-D, Crown digital amplifier
DSP input section with dbx Type IV limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
Professional XLR line and 1/4 inch Mic/Instrument inputs, with loop through
Obsidian DuraFlex coated plywood construction
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
8 M10 Suspension points and 1 pullback point
Integrated 36mm pole mount socket This speaker is ideally suited to applications where the program material exhibits subtlety and nuance. These cabinets can be stand-mounted but do require a large footprint tri-pod type stand. When pole mounting the PRX635 on a subwoofer JBL highly recommend a pole no longer than 24 inch to ensure stability and safety. As with all the full-range PRX600 Series systems two EQ selections can be used to optimize the system for the program material and/or environment. The input section also accommodates either Line or Mic/Instrument level inputs.
The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and overload lights indicate the system status and assist in setting the optimum level, via the level control knob.
All PRX600 cabinets are built from a combination of 25 mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. |
 JBL PRX618S Compact Portable Powered PA Subwoofer - 18 inch, 600 Watts
The JBL PRX618S Subwoofer offers compact, powerful performance fitting an 18 inch subwoofer in an enclosure close to the size of a typical 15 inch sub. The perfect compliment to PRX600 full-range mains, the PRX618S utilizes a pole receptacle on the top panel and integrated stereo pass-thru, with selectable HP filter. Add a couple PRX612M or PRX615M powered loudspeakers and you get a highly transportable, high performance subs/satellite system.
JBL PRX618S Features
600 Watt Class-D, Crown digital amplifier with 129db peak SPL
18 inch Differential Drive dual voice-coil and magnetic gap, neodymium woofer
Professional XLR line and 1/4 inch Mic/Instrument inputs
Stereo input and Loop-Thru capability
Top panel 36mm pole mount socket for sub/satellite configuration
16 Gauge, dent resistant grille
Obsidian DuraFlex coated plywood construction
Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip The PRX618S is a high performance self powered compact subwoofer system. The PRX618S is comprised of a 268G, 460 mm (18 inch) Differential Drive dual voice-coil and magnetic gap, neodymium woofer driven by a Crown Class-D power amplifier. The amplifier input panel offers stereo or mono line level inputs via balanced XLR connectors as well as a single channel speaker level input via a 1/4 inch TS phone jack. Signal processing, crossover functionality and limiting for the system is integrated into the input section functionality. Overall subwoofer input sensitivity is controlled by a single easy grip knob and a simple switch enables polarity reversal for sub/satellite system optimization. Signal present and limit lights indicate performance status.
All PRX600 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX600 Series cabinets are protected by JBL’s tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. |
 Electro Voice ELX115 Live X PA Speaker
A powerful step up from the ELX112, the Electro Voice ELX115 Live X PA Speaker features a 15 inch woofer that delivers extended low-frequency response for bigger sound in larger rooms. The ELX115 Live X passive loudspeakers features signature EV low-frequency and matched titanium high frequency drivers. Black wood cabinets create real stage presence with input and output connectivity to simplify set-up. Simple pole-mount or stacking options allow for versatile sound reinforcement applications.
Electro Voice ELX112 Live X PA Speaker Features
Designed for House of Worship, Pro Music, and other applications
Built in monitor angle for use as a floor wedge
15 inch woofer and 1.5 inch high-frequency titanium compression driver
50 Hz – 20 kHz frequency range 95 dB SPL sensitivity; 134 dB max SPL
400 W continuous and 1600 W peak power handling
Rugged wood cabinet — pole-mounts or stacks with Live X Subwoofers Electro Voice ELX112 Live X PA Speaker Specifications
Axial Sensitivity: 95 dB
Case Material: 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB): 75 Hz - 18 k Hz
Frequency Response (-10 dB): 50 Hz - 20 k Hz
Recommended High-Pass Frequency: 40 Hz
Max. SPL/1m (calc): 134 dB
Speaker: (1) EVS-15K, 15 inch Woofer
High freq transducer: DH-1K, 1.5 inch Titanium Diaphragm Compression Driver
Crossover Frequency: 1.7 k Hz
Nominal Impedance: 8 ohms
Connector Type: Dual NL4 Speakon
Grill: 18GA Steel with Black Powdercoat
Dimensions(HxWxD): 27.87 x 17.01 x 15.04 inches
Weight: 50.71 lbs |
 Yamaha MG124CX Stereo Mixer
The Yamaha MG124CX is the New Generation of MG Models
This new generation is designed to build on an already strong level of acceptance by providing new, highly useful features, upgraded internal components, and enhanced cosmetics. The unique single-knob compressors on their mono inputs are designed to keep loud from getting too loud, and soft from getting lost in the mix.These mixers are built for great sound, total control, and superior reliability, at prices anyone can afford.
Yamaha MG Features
Single-knob Input Compressors
Switchable Monitor Mix Routing
SPX Digital Effects
48V Phantom Power
Small Mixers with Serious Performance
Whether you're only mixing one microphone with a stereo source for the web, or multiple microphones and line sources for a live show, you want the highest performance, flexibility, and reliability available. Yamaha's MG-series mixers cover a wide range of applications from solo home recording to complex live sound with no compromises in sonic quality, processing versatility, or dependability. These new additions to the MG line-up feature the same compact, lightweight design as the preceding models, and incorporate the latest generation of specially-selected components for further refined performance and audio precision. They also now feature Yamaha's innovative one-knob compressor for built-in dynamics control that further eliminates the need for external equipment and potentially troublesome connections. If you need a convenient analog mixer that can handle from 8 and 12 input sources and deliver pro-level sound, plus top-quality SPX effects in the "CX" models, you're looking in the right place. |
 Yamaha MG166CX Stereo Mixer 4 Bus Mixer
Yamaha's MG166CX is a 16-input, 6-bus mixer with all the outstanding digital effects you'll need built-in. The MG166CX gives you the capacity, control, and performance you deserve. It's remarkably compact and lightweight for superior handling and portability, but absolutely no compromises have been made in terms of features, performance, or durability. The MG mixers offer an extraordinary blend of technology: some inherited from professional Yamaha mixing consoles you're likely to see in distinguished halls throughout the world, and some developed specifically to deliver optimum performance in the MG-console format. In either case these performance-packed mixers deliver features that really matter, and sound that is undeniably superior.
Yamaha MG166CX Features:
16 input channels
High Quality mic preamp
10 Mics + 4 Stereo line inputs
HPF
8 insert I/O
6 Compressors
Phantom power switch (+ 48V)
Illuminated CH ON switches
3 band Mid-sweep EQ (Ch 1-8)
60 mm Super smooth fader
3 band EQ (Ch 9/10-15/16)
SPX Digital multi effect
6 busses (Stereo + 4 groups)
Monitor mix
2 Aux sends + 1 Effect send
Lightweight (5.5 kg)
1 Stereo Aux return
12-seg LED level meter
Neutrik XLR Connectors
Rack Mountable
Input gain trim |
|
